Thierry Dubois is a freelance writer specializing in helicopters, business aviation and aerospace technology. He earned a degree in fluid dynamics from an engineering school in Toulouse, France in the mid-1990s. At an unexpected crossroads, he found his first job in journalism. In 1997, he started working for French aerospace weekly Air &amp; Cosmos in Paris. This lasted until 2000, when he moved south to Lyons. He then became a freelancer, working for various aerospace publications and has been part of the AIN team since late 2000. In addition to writing about business aviation, Thierry shares responsibility for the rotorcraft section. He also is a regular on-site writer for AIN’s daily editions at international airshows such as the Paris, Farnborough, Dubai and Singapore shows, as well as at EBACE in Geneva.
In 2007, he won the Honeywell award for “Best systems or technology submission” at the Aerospace journalist of the year awards. In 2013, he won an Aerospace Media Award for the "Best Safety, Training &amp; Simulation Submission."
In other activities, Thierry moderates international conferences on aviation technology topics. Thierry is married and has three children, who seem to begin enjoying the mountains–as their parents do.

Writer

Thierry Dubois

Researchers at the German Aerospace Center (DLR) in Göttingen may have discovered a way to make helicopters more maneuverable, by reducing the dynamic load on the rotor head control rods.


During rapid forward flight or maneuvering, airflow stalls on the main rotor blade as it retreats (moves backwards), giving rise to a “dynamic stall” and subjecting the rotor head control rods to formidable dynamic loads.


“It is just as though someone is striking the rotor with a sledgehammer,” explained Anthony Gardner, from the DLR’s institute of aerodynamics and flow technology. The rotor blades undergo pitching moments that move the leading edge down and the trailing edge up. The result is restrictions on the maximum speed and the maneuvering capability of helicopters, especially at high altitudes, said Gardner.


The DLR’s newly tested system dampens the phenomenon by forcing air outward through small holes in the rotor blades. This “reduces the amount of harmful turbulence” in the event of a dynamic stall, and aerodynamic forces on the rotor are reduced to “taps with a rubber mallet” rather than sledgehammer blows, according to Gardner. The pilot could have the option of activating the system briefly before engaging in demanding flight maneuvers.


The researchers say this is the first time that blowing air through holes in the main rotor blades has been seen to influence airflow in a controlled, favorable fashion, at least in a wind tunnel.


“It was only recently that we acquired the computational power to calculate what a wind-tunnel model of this kind should look like,” Gardner said. The DLR’s supercomputers have resolved questions about how widely spaced and how large these holes should be to obtain a positive effect.


DLR describes the experiment as the most complex ever performed in the field of dynamic stall control. For these tests, a one-meter (3.3 feet) segment of a rotor blade was installed in the wind tunnel. A compressed air system with a complex set of valves blew air through 42 openings, each measuring three millimeters (0.12 inch) in diameter. Seventy-four sensors measured pressures on the rotor blade up to 6,000 times a second, enabling precise depiction of the airflow.


The next step will be trials with a rotating rotor installed on a new rotor test bench.

News and issues regarding all manner of civil and military rotorcraft and their powerplants, including helicopters, tilt rotors and unmanned air vehicles.

DLR Researchers target blade dynamic stall

2024 Corporate Aviation Leadership Summit

News and issues relating to business, corporate and private aviation, primarily regarding turbine-engine-powered airplanes and helicopters. Subjects include aircraft, engines, maintenance, operations, personnel, acquisitions, accidents, safety, security, and training.

Commercial shipments nearly doubled, while new military program brought in more than $80M

Bell Soars in 3Q with Higher Civil Helo Deliveries, FLRAA

Charles Alcock

Japan General Aviation Service is already a customer for the larger 429 model

Bell Appoints Japanese Dealer for 505 Helicopter

Matt Thurber

News and issues about aviation maintenance, repair and overhaul (MRO), covering all segments of the aviation industry; and modifications for aircraft and engines. Subjects include product support of aircraft, engines and avionics, MRO company mergers, acquisitions, announcements and personnel, Airworthiness Directives, Supplemental Type Certificate approvals and other topics.

Plan will help ensure long-term job stability for Portugal workforce

Avincis Strengthens Portugal Helicopter MRO Base

News and issues concerning the aviation charter and fractional-ownership industries and markets, including company announcements, regulations, new developments and labor issues.

Twin-engine aircraft will be based at Broome in Western Australia

PHI Adds H175s to Australian Energy Support Fleet

Kits are retrofittable to 429s with existing single- or dual-hook systems

Onboard Talon Dual Cargo Hook Approved in Bell 429

ORRA encourages helicopter companies to go beyond traditional risk management

Operators Enrolling in VAI Risk Accreditation Program

News and information on safety procedures and concerns.

More In Rotorcraft

Bell Soars in 3Q with Higher Civil Helo Deliveries, FLRAA

Commercial shipments nearly doubled, while new military program brought in more than $80M

Bell Appoints Japanese Dealer for 505 Helicopter

Japan General Aviation Service is already a customer for the larger 429 model

Avincis Strengthens Portugal Helicopter MRO Base

Plan will help ensure long-term job stability for Portugal workforce

PHI Adds H175s to Australian Energy Support Fleet

Twin-engine aircraft will be based at Broome in Western Australia

Onboard Talon Dual Cargo Hook Approved in Bell 429

Kits are retrofittable to 429s with existing single- or dual-hook systems

Operators Enrolling in VAI Risk Accreditation Program

ORRA encourages helicopter companies to go beyond traditional risk management

FAA Issues Special Airworthiness Cert for Skyryse One

Single-flight-control user interface makes helicopter flying safer and easier

Blade Helo Shuttle Service Returns to 2024 NBAA-BACE

Helicopter flights will be available to transport attendees between the Las Vegas Convention Center and Henderson Executive Airport

AIN Products

SUBSCRIPTIONS

RESOURCES

ABOUT AIN