Airfoil

September 24, 2012 - 12:10pm

German aerospace research center DLR has just completed a series of wind-tunnel tests on a wing segment that incorporates both a morphing leading edge and a laminar profile for reduced drag. The trials took place between August 27 and September 7 at the TsAGI institute in Zhukovsky, near Moscow. Airbus, EADS Innovation Works and Cassidian Air Systems are partnered with DLR on the project.

June 4, 2012 - 12:10am

Aerion is preparing to start another round of test flights in the development of what would be the world’s first supersonic business jet. A new test article is set to fly in the centerline position beneath one of NASA’s F-15Bs either this month or next.

October 10, 2011 - 7:20am
Aerion supersonic business jet

Supersonic business jet developer Aerion Corp. (Booth No. N5707) says it has gained traction among aircraft manufacturers with its new aerodynamics consultancy–Aerion Technologies–since the subsidiary was launched in May at the European Business Aviation Convention and Exhibition (EBACE).

February 26, 2011 - 9:45am

Dassault Aviation conducted a "successful" flight test to evaluate laminar wings for large business jets. The flight was performed at the companyπs flight-test center in Istres, France, using a Falcon 7X equipped with an infrared camera to measure differences in surface temperatures between laminar and turbulent areas of the horizontal tailplane.

February 18, 2010 - 4:41am

Reno, Nev.-based Aerion is evaluating preliminary results of a new global market survey indicating strong demand for its proposed supersonic business jet. Preliminary data of the latest study confirms Aerion’s earlier research, which projected a 10-year market for about 300 supersonic jets. Meanwhile, Aerion plans to conduct a new series of flight tests on its natural laminar flow (NLF) wing design at NASA Dryden Flight Research Center.

February 2, 2010 - 11:31am

Reno, Nev.-based Aerion today said it is evaluating preliminary results of a new global market survey indicating strong demand for its supersonic business jet. “It was time to take a fresh look at the potential for the Aerion supersonic jet, taking into account the globalization of the business jet market,” said Aerion vice chairman Brian Barents.

November 12, 2009 - 7:19pm

Aerion is here in Dubai to tap what it believes could be strong market for the supersonic business jet (SSBJ) it intends to have certified in 2015. According to the U.S. company, it still holds letters of intent for about 50 of the aircraft and has had to refund only two deposits since the start of the financial crisis.

June 30, 2009 - 11:43am

General Electric (GE) has purchased a 51-percent share of Airfoil Technologies International Singapore, a joint venture between GE and Teleflex, for $300 million in cash. GE previously held a 49-percent share in the company. ATI Singapore, which started operations in 1998, is a repair facility for compressor airfoils.

August 5, 2008 - 8:59am

Under the cover of private funding, Honda has been secretly and very seriously developing its six- to eight-seat light turbofan twin. Though the automaker steadfastly maintains it has “no business plan” to manufacture the business jet, the project aircraft has a name, HondaJet, and the development program is well advanced.

May 8, 2008 - 9:21am

Last month NASA made the first flight of an experimental “wing warping” Boeing F/A-18 flying testbed. In 1903 the Wright Brothers used wires connected to their control column to twist the wings of their Flyer, changing the airfoils’ shape to provide differential lift to control bank. NASA calls the 21st century version of wing warping the “active aeroelastic wing,” or AAW.

 
X