Air Transport and Cargo » Air Transport and Cargo Engines

News and issues relating to air transport and cargo engines.

March 12, 2014 - 1:53pm

Rolls-Royce is looking to expand its engine component manufacturing activities in India, possibly adding new product lines and increasing the size of the facilities at its International Aerospace Manufacturing Pvt Ltd (IAMPL) operation in Bangalore, which already makes parts for the Trent 700 turbofan.

February 26, 2014 - 9:55am

Rolls-Royce on Wednesday revealed plans for a new generation of engine designs to replace the current Trent family. The first, called Advance, would reach the market by the end of this decade, burning at least 20 percent less fuel and emitting 20 percent less CO2 than the first generation of Trent engine. The second, dubbed UltraFan, would enter service by 2025 and use a geared design and a variable-pitch fan system capable of delivering at least a 25-percent improvement in fuel burn and emissions.

February 21, 2014 - 12:12pm

As CFM International and Pratt & Whitney progress toward the entry into service of their competing engines on the Airbus A320neo, the rival powerplant makers are at odds over which engine will deliver the best performance in terms of turbine temperatures.

February 13, 2014 - 12:20am

GE Aviation this week reported that testing on the high pressure compressor (HPC) module for the GE9X engine that will power Boeing’s 777X aircraft continues to yield “very promising results,” achieving a 27:1 pressure ratio–the highest of any commercial aircraft engine. The tests began in September at the GE Oil & Gas testing facility in Massa, Italy, and the module has accumulated close to 300 hours of testing today.

February 12, 2014 - 7:06am
Comac C919

CFM International is confident Comac’s C919 program is progressing on a sound basis, but the engine manufacturer does have contingency plans for the Leap-1C turbofan it has designed for the narrowbody to mitigate program risks in case further delays arise.

February 12, 2014 - 12:55am
Almost 30 years on since Pratt & Whitney Canada’s PW100 engine entered service, the manufacturer has continued to invest in boosting the performance of the turboprop family with improvements such as reduced maintenance requirements.

Regional airliner rivals ATR and Bombardier may still be no closer to announcing their long-anticipated new 90-seat twin turboprops, but Pratt & Whitney Canada (P&WC) is determined to be ready with the necessary powerplant for program launches that it views as inevitable. Next month, the engine maker will resume testing of the compressor unit for its proposed New Generation Regional Turboprop engine and it expects to have all testing complete by mid-year.

February 12, 2014 - 12:05am

Rolls-Royce and Cathay Pacific have agreed a TotalCare support contract for Trent 700 engines that power Cathay Pacific group’s 60 Airbus A330 aircraft in-service and on-order with Cathay Pacific group airlines, Rolls-Royce announced in Singapore on Monday. The contract runs for as long as Cathay Pacific and its sister company Dragonair operate the Trent-powered A330s.

Cathay Pacific became the first airline to operate any Trent engine when its Airbus 330s entered service in 1995 and today it stands as the largest Rolls-Royce Trent 700 customer.

February 11, 2014 - 1:55am
Taxibot plans to have its almost-autonomous tug in service this year.

Three companies are competing to offer airlines a fuel-saving way to have their aircraft taxi with engines shut down.

February 10, 2014 - 5:10pm
Rolls-Royce’s Trent 1000, although destined for the 787-10, is scheduled to enter service first on the smaller 787-8 and -9 by mid-2016.

As Rolls-Royce (Booth N23) prepares to begin a two-year development and testing phase for the latest Trent engine–the Model 1000-TEN, designed to power Boeing’s stretched 787-10 large twin-aisle twinjet–it has completed three full demonstrators and is building a fourth that will be used in a 500 flight-cycle trial.

February 9, 2014 - 6:50pm
Leap-1A, destined to power the Airbus A320neo, began running on GE’s Peebles, Ohio testbed last September. Next in line is the Leap-1B, which will power the Boeing 737.

Engine manufacturer CFM International (Stand G23) plans to test 15 Leap engines this year as part of a development program leading to certification of the Leap-1A for the Airbus A320neo next year. Also part of the program, the Leap 1B and -1C versions are to power the upgraded Boeing 737 Max and the new Comac C919 narrowbodies, respectively. The engine’s designers promise a 15-percent fuel burn advantage over the current CFM56.

 
X